Home / TOC sampling swabs / CS-T100
CS-T100
Gamma sterile
Schematic, not to scale
CS-T100
Standard product
TOC sampling swab, sterile, 3-layer pack
Knitted polyester head on a breakpoint polypropylene handle, gamma sterilised at SAL 10⁻⁶ and packed in three layers for direct entry into a Grade A/B transfer. Built for total organic carbon recovery and cleaning validation on stainless steel and glass.
Head materialKnitted polyester
TOC recovery> 95%
SterilityGamma, SAL 10⁻⁶
Pack1 / pouch · 50 / box
Free samples in 5 working days · MOQ 500 pcs · lead time 72 h ex-works
COA
TDS
SDS
Lot documents released before shipment and stored against your PO
Specifications
Typical values. The COA for your lot states the measured values and the test method used.
Head
| Material | Knitted polyester, continuous filament |
| Head width × length | 11 mm × 24 mm |
| Head thickness | 4.5 mm |
| Edge | Thermally sealed |
Handle
| Material | Polypropylene, virgin |
| Length | 150 mm |
| Breakpoint | Pre-scored, snaps into 16 × 100 mm tube |
Performance
| TOC recovery | > 95% (250 µL spike, n = 6) |
| TOC blank contribution | < 0.05 mg C / swab |
| Particles ≥ 0.5 µm | < 3.0 × 10⁴ / swab |
| NVR (IPA extract) | < 0.4 mg / swab |
Sterility & packaging
| Sterilisation | Gamma, 25–40 kGy, SAL 10⁻⁶ |
| Pack format | 1 / pouch · 50 / box · 12 boxes / carton |
| Layers | 3 (pouch + inner bag + outer bag) |
| Storage | 15–30 °C, RH < 80%, away from sunlight |
Commercial
| MOQ | 500 pcs |
| Lead time | 72 h ex-works (stock) · 15 days (production) |
| Incoterms | FOB Shanghai / CIF / DDP on request |
This is the standard spec. We can also make yours.
Roughly half of what leaves our floor is not a catalogue item — it is a customer’s drawing. Three things change most often:
01 / Head
Width, length, material
6–20 mm head width, foam or woven head, low-particle or high-absorbency variants. Tooling free above 20,000 pcs.
02 / Sterility
Sterile or non-sterile
Gamma, EtO or non-sterile bulk. We can hold a validated dose and re-qualify it for your product family.
03 / Pack & label
Private label
Your artwork, your pouch format, your lot-coding convention. Bilingual labels for SEA and EU markets.
Send a drawing or a competitor sample — we return a drawing, a price and a lead time within 5 working days.
Other formats in this family
| SKU | Head | Handle | Sterility | TOC recovery |
|---|---|---|---|---|
| CS-T100 | Knitted, 11 mm | Breakpoint | Gamma | > 95% |
| CS-T110 | Knitted, 13 mm | Snap | Gamma | > 96% |
| CS-T140 | Microfiber, 6 mm | Breakpoint | Gamma | > 94% |
| CS-T300 | Foam, 9 mm | Round | Non-sterile | > 88% |
Frequently asked, by QA
Is the swab sterile inside the pouch, or only the pouch?
The swab itself is sterilised after packing: gamma dose 25–40 kGy validated to SAL 10⁻⁶ on the packed unit. The COA reports the dosimeter readings and the bioburden before irradiation.
What extraction volume should I use for TOC?
For an 11 mm knitted head we recommend 10 mL of purified water with 30 seconds of vortexing; recovery figures on the TDS are measured at that volume. If your protocol uses 5 mL, ask for the recovery study at 5 mL — we run it per lot on request.
Can you supply a non-sterile version for environmental monitoring?
Yes — CS-T300 is the non-sterile bulk format. For qualification work we can supply both sterile and non-sterile from the same production lot, which removes a variable from your recovery study.
Send your protocol. We will send the recovery data.
Attach the sampling plan or the residue limit — an engineer replies within one working day with the matching SKU and extraction volume.